ASKO washing machine fault codes are very helpful when your washing machine plays up. The error code indicates what is the most likely reason for the breakdown. We have all the ASKO washing machine error codes listed bellow.
ASKO Washing Machine F1 Error – Overfill Fault
Description:
ASKO washing machine F1 error indicates that the washing machine has filled too much water.
Action To Take:
- Check water level, if the machine has too much water this indicates problem with inlet valve not closing when it should.
- If water level is low, this means the pressure sensor has failed.
ASKO Washing Machine F3 Error – Drain Fault
Description:
ASKO washing machine F3 error indicates that the machine is not able to drain water.
Action To Take:
- Check drain pump filter and impeller for obstructions.
- Check for kinks and blockages in drain hose.
- Disconnect hose from house drain pipe and put the end in a bucket, if water drains into bucket there is a blockage in house drain plumbing.
- Replace the drain pump.
ASKO Washing Machine F4 Error – Water Inlet Fault
Description:
ASKO washing machine F4 fault is a water inlet fault. The machine is not filling with water.
Action To Take:
- Check that the tap is turned on, no kinks in inlet hose and there is water in the tap.
- Check screen filter mesh on the inlet home and inlet valve to make sure it is not blocked with sand.
- Replace water inlet valves.
ASKO Washing Machine F10 Error – Overflow Fault
Description:
ASKO washing machine F10 error indicates that the washing machine has filled too much water.
Action To Take:
- Check water level, if the machine has too much water this indicates problem with inlet valve not closing when it should.
- If water level is low, this means the pressure sensor has failed.
ASKO Washing Machine F11 Error – Drain Fault
Description:
Washing machine has failed to drain the water.
Action To Take:
Check drain pump filter, hoses and drain pipes under sink for blockages. Replace drain pump.
ASKO Washing Machine F12 Error – Water Inlet Fault
Description:
ASKO washing machine fault F12 indicates that there is no water been filled into the drum. This is also one of the most common faults on washing machines.
Action To Take:
- Make sure tap is turned on and there is water in the tap and check the inlet hose for kinks.
- 2. Check screen mesh filter on the inlet hose and inlet valve.
- 3. Measure the supply voltage to the inlet valve.
Hope these ASKO washing machine fault codes have helped you solve your problem.
